KTM / Husqvarna / Gas Gas - LED Slim Handlebar Switch

Compact Design | Integrated LED Indicators | Plug-and-Play Installation

Upgrade your motorcycle's handlebar controls with this LED Slim Handlebar Switch, designed for selected KTM, Husqvarna, Husaberg and GASGAS models.

Its compact, space-saving design (22mm width) frees up valuable handlebar space, allowing greater flexibility for clutch lever positioning, additional switches and alternative lever setups.

Featuring integrated LED indicators for high beam and turn signals, this switch combines essential lighting and horn controls in a sleek, practical design.

Features & Benefits

• Slim, compact design – Frees up handlebar space for improved control positioning and additional accessories.
  
• Integrated LED indicators – Clear visual indication of high beam and turn signal operation.
  
• Multi-function controls – Operates headlights, turn signals and horn.
  
• Plug-and-play connectivity – Equipped with 3-pin and 6-pin connectors for compatible motorcycles.
  
• Flexible handlebar setup – Allows greater freedom when adjusting clutch lever positioning or installing alternative controls.

Switch Functions

• Headlights: Switch between low and high beam.
  
• Turn Signals: Left and right indicators, with hazard light functionality where supported.
  
• Horn: Integrated horn button.

Integrated LED Indicators

• Blue LED: High beam activated.
  
• Green LED: Left or right turn signal activated.

Headlight Operation: The low beam activates automatically when the motorcycle is switched on or running. The handlebar switch allows you to toggle between low and high beam.

Motorcycle Compatibility

• KTM 625 SMC (2004–2007)
  
• KTM EXC / EXC-F (2007–2026)
  
• KTM 690 Enduro (2008–2024)
  
• KTM 950 Super Enduro
• KTM 950/990 Adventure
• Husaberg FE 570S (2011–2012)
  
• Husqvarna FE 350S / FE 501S (2015–2016)
  
• Husqvarna FE (2017–2019)
  
• Husqvarna FE-S (2020–2026)
  
• GASGAS ES (2023–2026)

Important: If the original switchgear includes engine kill-switch button, an additional engine kill switch is required. Verify compatibility with your motorcycle's original electrical connections before ordering.

Installation Instructions

Important: The left-hand handlebar grip must be removed before installing the switch.

1. Remove the left-hand handlebar grip.
   
2. Slide the switch onto the handlebar from the end.
   
3. Position the switch for comfortable access to all controls.
   
4. Secure the switch by tightening the clamping bolt using a 3 mm Allen key.
   
5. Reinstall the handlebar grip.

⚠️ WARNING: Do not attempt to spread, flex or force the switch housing over the handlebar. The switch must be installed by sliding it onto the handlebar from the end. Attempting to flex the housing will break the clamp.

Package Contents

• 1 × LED Slim Handlebar Switch
  
• Integrated wiring with 3-pin and 6-pin connectors

Shipping and Returns:

• Delivery time within Switzerland is approx. 5 days.